marian

Card Making

Level of expertise

Rate this project

Total Score: 3.04 from 1823 votes (All Votes 5539)

The template for this project can be downloaded free from www.stampohmania.com/

You will need

Template from stampohmania
A4 card (for waterfall)
Five pieces of card
Five Christmas peeloffs
2 backing papers
1 square card and envelope
1 piece of green ribbon
Insert

Step-by-step

1. First fix the template to the card and cut along lines as shown, and fold on fold lines.
Take the five pieces of card, fix appropriate peel off on each one and stick each to just below the five fold lines.

2. Now push the long end of strip through the hole below waterfall and work up and down so the waterfall cascades easily.
Fold back the folded edges as in picture.

3. You will now need to prepare your card.
I cut the first backing paper punched the edges and stuck to card.
The second backing paper I cut considerably smaller, embossed a wavy line from corner to corner and cut along the line.
Attach to the card to bototm left and top right corners leaving the original backing paper showing in the middle. (a bit like a pulled cracker

4. Apply glue to the outside of the folded edges on waterfall and stick to front of card.
Cut a length of green ribbon and attack to bottom of waterfall.
By gently pulling this the waterfall will cascade.

5. For the insert, I printed out message and pointsettia on computer, and cut to size afterwards. Punch an attractive border on each side edge. And insert in card.

6. Gently pull on the ribbon and the waterfall will cascade